Microboards PF-Pro printer

New member
Posts: 4
Joined: July 11th, 2009, 6:27 pm

Postby scottcm » June 11th, 2012, 4:45 pm

I am using DiscCover 3 with a Microboards PF-Pro printer.

Every disc I am printing is off center yet when I do a test disc through the PF-Pro utility it prints perfectly.

Does anyone know the proper settings I need to print CD's and DVD's with a Microboards PF-Pro?

Thank you for your help.
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine

Postby Nick » June 12th, 2012, 4:50 am

Hi scottcm,

First, you need to make sure that the correct layout is selected. Two layouts are supported for Microboards printers. To open the list, choose File > Change Layout. If one layout gives an offset output, try to print with another.

To center the design precisely, you can calibrate your printer. Select File > Calibrate Printer. Click the Print Calibration Sheet button. Then set the correction values in the Vertical and Horizontal fields according to the printed rulers. If you still keep one of unsuccessfully printed discs, you can use it for calibration in case there is enough blank space.


Return to “Disc Cover”

Who is online

Users browsing this forum: No registered users and 6 guests