layout with angled walls

srdesigns
Member
Posts: 10
Joined: April 30th, 2018, 10:36 am

layout with angled walls

Postby srdesigns » April 30th, 2018, 10:51 am

Hi, I am just starting out using this. I live in a small condo and was hoping to draw it out and use the program to do some interior design and figure out the best layout of furniture. But I am stuck drawing the layout of my condo. It is not a rectangular space with 90 degree angles. When I draw it out, and then view it in 3D, it makes the outside a perfect rectangle with 90 degree angles and then makes my interior walls odd angles. When in reality, the four corners are not 90 degrees but some of the interior walls are. How do I fix this?

Also, how do I make some interior walls not go all the way to the ceiling?

Attached is an image of the layout of the condo that I am trying to recreate.

IMG_8208.JPG
IMG_8208.JPG (233.45 KiB) Viewed 305 times
Roustaboutpusher
Member
Posts: 69
Joined: December 22nd, 2017, 4:10 am

Re: layout with angled walls

Postby Roustaboutpusher » April 30th, 2018, 11:30 am

Hi, I just made a quick sketch similar to your condo. Is this what you want to achieve? The single wall in the 3d view I opened in 2d elevation view, and cut out the top with the "cut out tool". You can also extract a shape from the wall ( see a post further down named " the versatile wall panel tool ". Lastly you can also use a shape from the shapes library.
2018-04-30_18-21-05.jpg
2018-04-30_18-21-05.jpg (75.51 KiB) Viewed 301 times
Roustaboutpusher
Member
Posts: 69
Joined: December 22nd, 2017, 4:10 am

Re: layout with angled walls

Postby Roustaboutpusher » April 30th, 2018, 11:35 am

When I made the drawing I first used the "floor and ceiling poly tool" and then drew the walls with the "straight wall tool"
srdesigns
Member
Posts: 10
Joined: April 30th, 2018, 10:36 am

Re: layout with angled walls

Postby srdesigns » April 30th, 2018, 12:01 pm

Yes, that looks similar to what I want to do. Thank you, I'll have to try that out. I guess I was just using the wall tool. I'm very new to this.
Roustaboutpusher
Member
Posts: 69
Joined: December 22nd, 2017, 4:10 am

Re: layout with angled walls

Postby Roustaboutpusher » April 30th, 2018, 12:20 pm

In fact, you can just use the straight wall tool too, if that is more convenient. I guess you must have done some other error.
srdesigns
Member
Posts: 10
Joined: April 30th, 2018, 10:36 am

Re: layout with angled walls

Postby srdesigns » April 30th, 2018, 12:37 pm

Yes, it is strange because I drew the outer walls first with the straigh wall tool and then drew the inner walls with the same tool. It all looks correct in 2D, but when I view it in 3D, the outside walls are a perfect rectangle with 90 degree angles and then the interior walls are at strange angles.
Roustaboutpusher
Member
Posts: 69
Joined: December 22nd, 2017, 4:10 am

Re: layout with angled walls

Postby Roustaboutpusher » April 30th, 2018, 1:11 pm

Have you checked that your "view" is perspective and not orthographic?
2018-04-30_20-08-29.jpg
2018-04-30_20-08-29.jpg (22.09 KiB) Viewed 295 times
srdesigns
Member
Posts: 10
Joined: April 30th, 2018, 10:36 am

Re: layout with angled walls

Postby srdesigns » May 1st, 2018, 6:23 am

Thank you. I tried some of the things you mentioned this morning and got it to work. I was at work yesterday and not in front of my computer that has this so I couldn't the things you mentioned until now. I have one other issue but I'll start a new thread as it is a completely different issue.

Thanks!
Roustaboutpusher
Member
Posts: 69
Joined: December 22nd, 2017, 4:10 am

Re: layout with angled walls

Postby Roustaboutpusher » May 1st, 2018, 9:18 am

Glad to help.

Return to “Live Home 3D”

Who is online

Users browsing this forum: No registered users and 2 guests