Astronomical dome

np252003
New member
Posts: 2
Joined: January 25th, 2015, 8:51 am

Astronomical dome

Postby np252003 » January 25th, 2015, 9:00 am

Hello guys
i would like to make my 3d astronomical dome.I have almost done with the building but i can not fix the dome ....
Can anyone explain how i can do it and then insert it in my project :?: :?: :?: :?:

Thanks in advance
Nikos
Attachments
ashreb14651620x72.jpg
ashreb14651620x72.jpg (84.84 KiB) Viewed 605 times
S_S_Specs 1.GIF
S_S_Specs 1.GIF (24.63 KiB) Viewed 605 times
Nick
Member
Posts: 7237
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Re: Astronomical dome

Postby Nick » January 26th, 2015, 3:25 am

Hi Nikos,

Live Interior lets you add a very simplified version of a dome roof. How to do this is explained here:
http://www.belightsoft.com/forum/viewtopic.php?f=32&t=9859

For more detailed model, you need to import a dome as a 3D object and install it instead of the roof. Try to search for it in Trimble Warehouse object library. Note that if you wish to have the dome with both states of shatters (open and closed), you should find two dome models showing each of these states.

Nick
np252003
New member
Posts: 2
Joined: January 25th, 2015, 8:51 am

Re: Astronomical dome

Postby np252003 » January 26th, 2015, 7:12 am

Hello Nick
thanks for the reply .
I found some in the warehouse , i insert it but i can not transform it to fit in my model ....
Do i do something wrong?
Nick
Member
Posts: 7237
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Re: Astronomical dome

Postby Nick » January 27th, 2015, 4:17 am

Hi

How do you need to transform the model? It its size or aspect ratio should be changed, use the Object Properties tab of the Inspector.

Nick

Return to “Live Interior 3D for Windows”

Who is online

Users browsing this forum: No registered users and 1 guest