| www.belightsoft.com/liveinterior | Start of Help > Program Reference |
See recommendations from the Registration section.
The object, which you cannot select, may be locked. Find the object in the Project Tree in the Library to verify this.
The following settings affect the program performance (basically when you "walk" in 3D).
| Parameter or Property | Available In | Set To | Affected View |
| Rendering Quality | Program Preferences > the 3D Settings tab, or on the 3D toolbar |
Without Lights and Shadows | 3D |
| Decrease Quality when Moving (does not increase the speed of walking when "Rendering Quality" is set to "Without Lights and Shadows") |
Program Preferences > the 3D Settings tab | Without Lights and Shadows | 3D |
Cast Shadows (switch off shadows of unimportant objects, and when the shadow is invisible because of the object location) |
Inspector > the Object Properties tab | Off | 3D |
| Tessellate Walls and Slabs | Program preferences > the 3D Settings tab | Off | 3D |
| Animate Library 3D Preview by Default | Program preferences > the Miscellaneous tab | Off | 2D and 3D when the library is shown |
| Number of open views | - | Do not open the 2D and 3D views at the same time | 2D and 3D |
| Light from lamps, candles and fireplaces | Inspector > 3D Properties tab > Lights list | Off | 3D |
| Rulerlines |
View menu | Off | 2D |
| Rulers | View menu | Off | 2D |
If you want to optimize performance for one view only, check with the right column to define the corresponding parameters.
The printer does not print:
If your printed text or images have low quality (light stripes or gaps on the printout / the printout fades out / you see wrong colors), check the ink or toner level.
If the printout is blurry, or ink dries out for a long time:
To understand the cause of the problem, make a test printout from other software. If the problem persists, it's more likely that the problem is related to the hardware.
For more detailed guidance, refer your printer User's Manual.
If you could not find a solution to your problem above, contact the BeLight Software support.