Split level

New member
Posts: 1
Joined: December 27th, 2017, 9:26 pm

Split level

Postby johannafikkers » January 1st, 2018, 9:13 pm

Hi, Just wondering how to add a split level to my house design?
We live on a sloped block so the house is ground level from the front but then is effectively 3 levels at the back.
We step down from the back of the main house about 6 steps (1.2m) to an outdoor area which has the same roof height as the main house (like a sunken room), then there are another 6 steps (1.2m) or so that takes you to the under house storage area.

I'm trying to model this sunken outdoor area as this is the space we want to renovate.

I cannot figure out how to set the room floor level as 1.2m lower than the main house but the same roof height. The Elevation on floor won't let me set anything past 0.2m ?? Am I doing something wrong? Seems like I should be able to set it for a lower amount than that?
Thanks in advance.
New member
Posts: 1
Joined: August 28th, 2017, 9:45 am

Re: Split level

Postby dougdownunder » February 4th, 2018, 6:00 pm

Hi Mate, i spent hours and hours on this last year and contacted igor at belight but the software does not support split levels. which is a real shame because it's a great program and as a house designer it is my quick go too.
Maybe if more people ask them they might make it happen.

Only thing you can do is sunken floor area inside walls.
If you have any luck please let me know as i have project on go as well.

Kind regard


Return to “Live Home 3D”

Who is online

Users browsing this forum: No registered users and 3 guests