Firewall & Apple Extreme

kevinr
New member
Posts: 2
Joined: August 26th, 2011, 2:12 pm

Postby kevinr » August 26th, 2011, 2:15 pm

If I want to log in from a remote location (not on same network) - I use my real IP address? The IP address on the server is a 10.x.x.x... I tried both ways and nothing seems to work. I have added the RV server to the allowable programs to accept incoming...

Thanks
Nick
Member
Posts: 7231
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » August 27th, 2011, 2:28 am

Hi kevinr,

Try to type those IP that is displayed in the RV Server window.

Nick
kevinr
New member
Posts: 2
Joined: August 26th, 2011, 2:12 pm

Postby kevinr » August 27th, 2011, 7:05 am

Hi Nick,

the IP !0.x.x.x works when I am on my own network. I want to be able to log in from a remote location... I assume I will use my real IP, 278.x.x.x:8080? Not sure though
Nick
Member
Posts: 7231
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » August 29th, 2011, 5:33 am

Probably you should set up your router to accept external connections and forward them to your Mac's port 8080.

Nick
Nick
Member
Posts: 7231
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » December 7th, 2012, 9:24 am

alicia45,

Verify the data you enter on the server side and in Remote Viewer. If all is correct, you can only vary the port. By default, 8080 is used. It it is taken by another program, in the iOS part, type "10.10.1.123:8081" instead of "10.10.1.123" for IP address (if you decided to use port 8081). In the server part, set port this way:
http://www.youtube.com/watch?v=1W_DineKVYE

Nick

Return to “Remote Viewer”

Who is online

Users browsing this forum: No registered users and 2 guests