Page 1 of 1

Calibrate a HP 7520

Posted: June 10th, 2016, 1:53 pm
by captgadget
I'm using Avery 5160 labels and I can't get it to fit vertically. I used the vertical alignment numbers and to no avail. I've even tweaked above what the tick marks show and it just stays the same.

Re: Calibrate a HP 7520

Posted: June 10th, 2016, 1:57 pm
by captgadget
I kind of solved my own problem. When I use the regular white label it prints fine and when I use the invisible label that's the one that prints off. Must be in the way the printer is feeding the invisible sheets.

Re: Calibrate a HP 7520

Posted: June 13th, 2016, 10:41 am
by Nick
The calibration settings do not affect the calibration sheet. the Marks on it which show the offset never go to the zero point after successful calibration. Contrary, a regular document should consider the calibration values while it is printed.

Nick