Problems printing on Zebra 35x10mm

dougne
New member
Posts: 6
Joined: February 11th, 2012, 9:06 pm

Postby dougne » March 10th, 2012, 1:53 pm

Hello!
I have problems printing a label with 35x10mm. When i customize it, the printer understand that's the label is in right corner, not in center. Any ideas?
Thank you.
Nick
Member
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » March 10th, 2012, 2:28 pm

You can adjust the position of the label on paper by changing the Top Margin and Left Margin parameters.

Nick
dougne
New member
Posts: 6
Joined: February 11th, 2012, 9:06 pm

Postby dougne » March 10th, 2012, 9:56 pm

Hello!
It's strange because the label I did with 70x40 mm works correctly. The label with 30x10 don't work... i tried to change the margins but it didn't work. The printer understand that's the right corner, but the paper don't have space to that.
Nick
Member
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » March 11th, 2012, 5:18 am

In the current version, there is no support for customization roll labels. Are you using an old version?

Check if your printer supports 35X10 mm labels. Open the TextEdit application and bring up the Page Setup dialog (File > Page Setup). In "Format For", choose your printer. Then open the Paper Size list and try to find your format.

With Zebra LP2844 selected, I couldn't find the label format you wish to print on.

Nick
dougne
New member
Posts: 6
Joined: February 11th, 2012, 9:06 pm

Postby dougne » March 11th, 2012, 2:07 pm

i think that's the problem... but I could print with other label. This is a little one for this printer. Thank you!
Nick
Member
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » March 12th, 2012, 5:15 am

If 35x10 mm is a standard label, please give me its full name (see how the Zebra labels are named in the paper list). This will let us to add this type of labels to the program.

Nick

Return to “Labels & Addresses / Mail Factory”

Who is online

Users browsing this forum: No registered users and 2 guests