A new template from BeLight Community website…

Jean-Jacques Boutaud
Member
Posts: 1640
Joined: July 10th, 2006, 2:29 pm
Location: France
Contact:

Postby Jean-Jacques Boutaud » April 1st, 2007, 4:28 pm

Hi all,
Thanks to aussie141 (one more time :^), here's a new (SP) template:

"This will print onto both sides of an A4 sheet, to allow you to cut out a C6 size card. The sheet you print onto should be card, at least 180GSM. If you do not have a duplex printer, or need to change settings between sides, print each side separately. Some more instructions on template."
JJBee, Président (à vie) du G.R.O.I.N.
Secrétaire général : iMac C2D 2.16GHz
Secrétaire adjoint : MacBook Pro 17" Unibody 3.06GHz
http://belightcommunity.free.fr/BeLight Community website
Nick
Member
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » April 2nd, 2007, 3:49 am

Hi,
One of pages was rotated upside-down in relation to another in the template. For correct page orientation at duplex printing, set the Two-Sided option to Long-edged binding in the Layout section of the system print window.

Nick
Jean-Jacques Boutaud
Member
Posts: 1640
Joined: July 10th, 2006, 2:29 pm
Location: France
Contact:

Postby Jean-Jacques Boutaud » April 2nd, 2007, 4:59 am

Hi Nick,
Thank for this.
I'll send a mail to aussie141 as it's not a template of mine.
JJBee, Président (à vie) du G.R.O.I.N.
Secrétaire général : iMac C2D 2.16GHz
Secrétaire adjoint : MacBook Pro 17" Unibody 3.06GHz
http://belightcommunity.free.fr/BeLight Community website
aussie141
Member
Posts: 33
Joined: August 27th, 2006, 2:34 am

Postby aussie141 » April 3rd, 2007, 6:12 am

Ah now, I think we may have a problem here, Nick. This works as it is on my Canon MP750, with one page upside-down in relation to the other. I already had long-sided stapling set in the Duplex Printing & Margins menu of the Canon. If I then rotate that page so that both are facing the same way, then use Long-sided stapling, one page is printed reversed. Can some others please try, and share the results?
Peter aussie141
aussie141
Member
Posts: 33
Joined: August 27th, 2006, 2:34 am

Postby aussie141 » April 11th, 2007, 5:42 am

Anyone tried this yet?

Return to “Swift Publisher”

Who is online

Users browsing this forum: No registered users and 5 guests