Printing Problem on HP PhotoSmart C4580 All-in-One for busin

gun516
New member
Posts: 1
Joined: October 27th, 2008, 10:31 am

Postby gun516 » October 27th, 2008, 10:42 am

Hello,

I have printed out 5 sheets and can't get the cards to print right. I have the Avery 8879 Gloss Clean Edge Business Cards. It also says to use template 8371. My printer calibration numbers are already done. Horiz. 0.1, Vert. -0.9, Scale -10.05. Yet the cards still print 0.7 cm to high. There has to be something that can be done as I have contacted support and they have been unable to do anything. This is such good program I just wish it could print right. Thanks for any help that you can provide.

Tommy
Nick
Member
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » October 27th, 2008, 11:20 am

Hi Tommy,

I hope you have calibrated the printer correctly.
But probably, you used plain paper for calibration or you printed the calibration sheet in the low quality mode. If so, it's not good. The printer feeds paper in different way depending on the paper type and print quality. Did you print the calibration sheet on "Avery 8879 Gloss Clean Edge Business Cards" paper?

Nick

Return to “Business Card Composer”

Who is online

Users browsing this forum: No registered users and 3 guests