Printing direct to DVD using Epson Stylus Photo RX700

New member
Posts: 1
Joined: November 3rd, 2009, 4:42 pm

Postby alexg » November 3rd, 2009, 4:48 pm


I have been trying to print direct to DVD using my Epson RX700 and Disc Cover 2 with Mac Leopard. The printer just ends up printing it onto paper.

I have in the Print Settings the following:

Output: Direct to CD/DVD
Tray Type: Epson Tray Type 2 (CD Tray)
Printer: Epson Stylus Photo Rx700

After clicking Next, i go to Layout, and Print Settings. I change Media Type to CD/DVD

If the CD tray is in place, the printer asks to remove it, and ends up printing onto paper.

Please advise me how to proceed.

Many thanks.
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine

Postby Nick » November 4th, 2009, 4:01 am


Try to turn the printer off. Remove the tray. Turn the printer on. Wait until the initialization process is finished. Take all the paper out. Install the tray and try to print.

Similar steps are usually present in the printer manuals. Also, please make sure that you have enough space behind the printer.


Return to “Disc Cover”

Who is online

Users browsing this forum: No registered users and 5 guests