Cannot print Cover Disc 3 to disc on Canon MG6250 - OS 10.7.

RobyB
New member
Posts: 1
Joined: August 15th, 2012, 11:00 pm

Postby RobyB » August 15th, 2012, 11:24 pm

Hi
I'm unable to print to Disc on Cover Disc 3

I choose print "Direct to CD/DVD
Canon Tray type F,G (CD Tray)
Printer Canon MG6200 Series
Then:
Media & Quality
But there is no option from here to select CD/DVD like in the past under Media & Quality.

There's only:
Media & Quality
Layout
Paper Handling
Cover Page

Thanks
RobyB
Nick
Member
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » August 16th, 2012, 6:00 am

Hi RobyB,

As far as I understand, some time ago you could choose the CD/DVD option in the Print dialog. Did you change anything in the system what could affect printing settings? Maybe updated Mac OS or the printer driver?

Try to print oa disc again with double-checking the respective settings. In the Print dialog of Disc Cover, Output should be "Direct to CD/DVD", Tray Type - "Canon Tray Type F,G", Printer - Canon MG 6200.

In the system print dialog, set Presets to "Default Settings". In the Paper handling section, scaling should be turned off. Then move the the Quality and Media section and see if the CD/DVD option is available.

Nick
monte16@gmail.com
New member
Posts: 1
Joined: December 12th, 2012, 10:25 pm

Postby monte16@gmail.com » December 12th, 2012, 10:33 pm

Hi Nick
I'm having exactly the same problems!
It is only printing to paper when these settings are setup.
There is no ability to change the Quality & Media section to CD/DVD option.
I am using the latest version of DC RE3.
Nick
Member
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » December 13th, 2012, 5:10 am

Hi

The CD/DVD option can be locked in the Quality & Media section because you haven't selected the correct printer tray. Please select File > Change Layout in the main menu and make sure that the correct Canon Tray Type is selected.

Nick
crispy
New member
Posts: 7
Joined: January 1st, 2013, 7:02 am

Postby crispy » January 1st, 2013, 7:07 am

I had this same EXACT problem. The problem turned out NOT to be Belight software but rather my printer settings. When I setup the printer in OS X (mountain lion) I was given the option to set up the printer in Bonjour or with Canon's Network settings. I when I chose Bonjour, it didn't work. When I reinstalled the printer with the Canon Network settings, the software did print to disk like it was supposed to. It also fixed a problem with Canon's add-on software. Check how your printer was added and setup.
martha
New member
Posts: 1
Joined: December 3rd, 2013, 4:42 pm

Postby martha » December 3rd, 2013, 5:11 pm

trying to print a cd disc cover but it says the printer don't support the papper sise change to a printer that supports it but the cd disc cover is in my image garden so it should print it its a cannon gm3200
Nick
Member
Posts: 7241
Joined: July 6th, 2006, 3:13 am
Location: Odessa, Ukraine
Contact:

Postby Nick » December 4th, 2013, 3:06 am

Hi martha,

Please follow this instruction:
http://www.belightsoft.com/products/disccover/DCHelp/print_disc.html

Tray Type F,G should be compatible with your printer.

Nick

Return to “Disc Cover”

Who is online

Users browsing this forum: No registered users and 3 guests